Publicidad
Idiomas disponibles
Idiomas disponibles
English
Owner´s manual
4. Gear Choice
Gear box has 5 shifts, including neutral position. The gears are optional. (Look at table 5)
Transmission speed(km/h)
Forward
Slow
Fast
2.55
4.83
Change gear
1. Counterclockwise turn the throttle switch to the right position (mini).
2. Clench clutch handlebar, and make clutch open.
3. Change shift lever to the gear you need.
4. Loosen clutch handlebar, make machine into the changed gear, then open
the throttle to increase the speed into the work.
5. If necessary, we may start engine to check if clutch can work.
5. Attention items of using rotary tiller
1. When using tiller, you should pay attention to the working situation and the sound, check the
connection. If there is abnormal situation, you should stop the rotary tiller and check.
2. Never carry out work in heavy load condition if tiller has not been used for some time,
especially for the new ones or the repaired ones.
3. Pay attention to the oil level of diesel engine and gear box. Please refuel oil in insufficient
condition.
4. Never cool the diesel engine in the way of water-pouring.
5. Prevent rotary tiller from falling down when tilling.
6. Never install mini tiller with rotary blades work on sand or stone to avoid damaging blades.
7. After tilling, pay attention to clear away dirtiness in the rotary tiller, such as mud, grass and oil
stain.
8. Frequently wash the sponge in the air filter and change oil more often.
9. Ridging or weeding: Assemble ridging or weeding blades to the tilling box, turn handlebar to
the direct of engine. When tilling, tilling box is front and gear box is rear. According to the falling
soil position, we adjust mud fender or side mud fender.
5. STOPPING THE ENGINE
In an emergency, you may directly turn switch to
OFF position. Generally, adopt the following steps
to turn off engine.
A) Counterclockwise turn throttle switch to
minimum scale or turn throttle handle to the right.
38
Gear box
Stop
Back
Neutral
Slow
Fast
-
1.82
3.45
Tilling box(Using with chain box together)
Blades rotary speed (rpm)
Fast
Stop
High
Low
Neutral
553
299
-
(1) Throttle lever
Slow
High
Low
311
168
Publicidad
