•
The connection between the device and the electrical network may employ a 3 meter
long (max.) extension cable with a cross-section of 1.5 mm². The use of multiple plugs or
gangs is prohibited because of the danger of fi re that is involved with this.
•
Make sure that the power cable is undamaged and has not been installed under the
device or over hot or sharp surfaces.
•
The electrical outlet must be protected by a 16A safety cut-out switch.
•
The electrical safety of the device is only guaranteed if the device is connected to a
properly installed protective conductor system. If in doubt, have the house installation
checked over by a qualifi ed electrician. The manufacturer cannot be made responsible for
damages that are caused by a missing or damaged protective conductor.
4 Design and Function
This chapter provides you with important information of the design and function of the device.
4.1 Overview
1
2
3
4
6
Lid with ventilation slots and recessed
1
grips
Drying rack (5 racks) with recessed grips
2
Base device
3
5
7
Recessed grips in the base device
4
Control panel with LED display
5
Silicone mould for muesli bars (2 moulds)
6
Dehydration sheet (2 sheets)
7
23
CASO DH 450
DE
EN
FR
IT
ES
NL
RUS
SE
PT