Publicidad
Idiomas disponibles
Idiomas disponibles
Operation
Switching the appliance on
NOTE
►
Ensure that the cutter attachment
collector
♦
Move the REV/OFF/AUTO/FWD switch
shredding. The power lamp
appliance is now ready for use.
Inserting paper
CAUTION! PROPERTY DAMAGE!
Never feed paper into the cutter opening
clips or staples larger than 25 mm attached! These could damage
the cutting blades.
NOTE
You can shred up to 10 sheets (80 g/m
max.
10
x 80g/m2
Fig. 3
NOTE
►
Regularly remove any residue left in the cutting blades with a suitable
object (e.g. brush or tweezers). Ensure that the appliance is unplugged
before doing this.
UAV 300 A1
w
.
4
Insert paper into the middle of the cutter opening for
9
paper
from above and in portrait format (see fig. 3).
The appliance starts automatically and switches itself off
automatically if no further paper is inserted.
6
is sitting correctly on the large waste
3
to the AUTO position for
lights up permanently blue and the
9
if it still has paper
paper) at the same time.
2
GB │ IE
7
│
■
Publicidad
