UNITED OFFICE UAV 300 A1 Instrucciones De Uso E Indicaciones De Seguridad página 9

Assembly
WARNING! – RISK OF INJURY!
► Do not connect the appliance to a power socket during assembly.
► The cutting blades in the cutter attachment
sharp. Take extreme care when assembling the appliance.
♦ Place the small waste collector
push the small waste collector
waste collector bin
Fig. 1
♦ Hold the cutter attachment
and position it over the large waste collector
points backwards and the viewing window
points forwards (see fig. 2).
NOTE
► The cutter attachment
w
tor
► The appliance cannot be used until the cutting attachment
seated on the large waste collector
First use
NOTE
► Make sure the REV/OFF/AUTO/FWD switch
before plugging the appliance into the power socket.
► Every shredder is tested for functionality after manufacture. It is possible
that you may find paper residue in the cutting blades.
♦ Insert the plug
GB │ IE
│
■ 6
w
until it is fully engaged (see fig. 1).
6
6
must sit upright and firmly on the large waste collec-
. Otherwise, the appliance will not start!
1
into a mains power socket.
6
of the appliance are very
0
in the large waste collector
0
down along the guide rails in the large
Fig. 2
by the two integrated carrying recesses
w
so that the power cable
q
in the large waste collector
w
and the safety switch
3
is in the OFF position
w
. To do this,
8
1
w
6
is correctly
7
deactivated.
UAV 300 A1