UNITED OFFICE UAV 300 A1 Instrucciones De Uso E Indicaciones De Seguridad página 12

Turning the appliance off
NOTE
► We recommend that you switch off the appliance and let it cool down for
about 30 minutes after 3 minutes of operation to prevent overheating.
Switch the appliance off by moving the REV/OFF/AUTO/FWD switch
♦
the OFF position. The power lamp
Overheating protection
This appliance is fitted with overheating protection. If the motor overheats due to
overloading, the appliance switches itself off automatically. The overheat lamp
lights up permanently red until the motor has cooled down sufficiently.
If this occurs, do the following:
WARNING! – RISK OF INJURY!
► Pull the power plug
starting of the appliance.
♦ Switch the appliance off by moving the REV/OFF/AUTO/FWD switch
the middle OFF position.
♦ Empty the waste collectors
♦ Allow the appliance to cool down for about 30 minutes.
♦ Replace the plug
♦ Switch the appliance on by moving the REV/OFF/AUTO/FWD switch
to the AUTO position. The overheat lamp
appliance has cooled down sufficiently.
Emptying the waste collectors
WARNING! RISK OF INJURY!
► Remove the power plug
from accidentally switching on.
NOTE
► Empty the waste collectors
material from being drawn into the cutting blades from below.
► Dispose of the waste material in an environmentally-responsible manner.
♦ Hold the cutter attachment
on the left and right and pull it off the large waste collector
♦ Pull the small waste collector
♦ Empty the large waste collector
UAV 300 A1
4
goes out.
1
out of the power socket to prevent unintended
0 w
/ .
1
in the mains power socket.
1
from the power socket to prevent the appliance
0 w
/ regularly to prevent the shredded
6
by the two integrated carrying recesses
0
out of the large waste collector
w
and small waste collector
5
no longer lights up once the
w
.
w
0
GB │ IE
3
to
5
3
to
3
8
.
separately.
9
│
■