Publicidad
Idiomas disponibles
Idiomas disponibles
♦
Place the small waste collector
(see fig. 1).
♦
Hold the cutter attachment
and position it over the large waste collector
points backwards and the viewing window
points forwards (see fig. 2).
Cleaning
DANGER! RISK OF ELECTRIC SHOCK!
►
Always pull out the plug
of electric shock!
WARNING! RISK OF INJURY!
►
The appliance becomes hot during use. Allow the appliance to cool down
completely before cleaning it.
►
Do not touch the cutting blades of the appliance with your fingers.
The cutting blades are very sharp!
CAUTION! PROPERTY DAMAGE!
Do not spray any oil or other lubricants into the cutter openings
These can irreparably damage the appliance.
►
To avoid irreparable damage to the appliance, ensure that no moisture
gets into it during cleaning.
►
Do not use caustic, abrasive or solvent-based cleaning materials. These can
damage the surfaces of the appliance.
♦
Remove any residue left in the cutting openings
with a suitable object (e.g. brush or tweezers). Ensure that the appliance is
unplugged before doing this.
♦
Clean the surfaces of the appliance with a soft, dry cloth.
♦
Use a lightly moistened cloth and a mild detergent to remove stubborn dirt
residues from the appliance surface.
Storage when not in use
♦
If you decide not to use the appliance for a long period, disconnect it from
the mains power supply and store it in a clean, dry place away from direct
sunlight.
GB │ IE
│
■
10
0
back in the large waste collector
6
by the two integrated carrying recesses
w
q
in the large waste collector
1
before cleaning the appliance. There is a risk
w
so that the power cable
2
2
9
/
or cutting blades
UAV 300 A1
8
1
w
9
/
.
Publicidad
