Publicidad
Idiomas disponibles
Idiomas disponibles
Phase
2
Start of machine operation
The display shows:
- cell temperature;
- number of door openings
(at 24:00 each day, the count of
openings is reset);
- set temperature;
- time of next automatic
defrost.
3
Modify set temperature
Press keys P5
previously set temperature.
If the data is not modified within 3 seconds,
it is automatically memorized.
4
End of conservation cycle
If you press key P7
the conservation cycle and enter standby mode.
Enhanced cycle (if present)
Phase
0
Start the conservation cycle
1
Press the P3 key
cycle of the conservation unit.
The temperature is set in parameter 2-9.
The default values are:
• Negative mode -30°C;
• Positive mode 0°C
The display shows:
• cell temperature;
• - number of door openings
(at 24:00 each day, the count of
openings is reset);
• time remaining to end of
enhanced cycle
• Time of next automatic defrost
(during the enhanced cycle,
no defrost cycle will be run)
2
Modify enhanced cycle end time
Press keys P5
time of the enhanced cycle.
If the data is not modified within 3 seconds,
it is automatically memorized.
All manuals and user guides at all-guides.com
Description
-18°C
No.: 12
No.: 12
SET : -20°C
: 12.00
and P6
to modify the
, the machine will end
Description
to start the enhanced
-18°C
No.: 12
No.: 12
02:00
: 12.00
and P6
to modify the
17
Front panel screen
-18°C
No.: 12
SET : -20°C
No.: 12
: 12.00
-18°C
No.: 12
SET : -20°C
No.: 12
: 12.00
OFF
27.07.2007
10.35
Front panel screen
-18°C
No.: 12
SET : -20°C
No.: 12
: 12.00
-18°C
02:00
No.: 12
No.: 12
: 12.00
-18°C
02:00
No.: 12
No.: 12
: 12.00
Publicidad
