irinox CP Serie Instrucciones Para El Uso página 50

Phase
3
End of enhanced cycle
When the time set for the enhanced cycle is
reached, the enhanced cycle will end and the
conservation cycle will automatically begin.
4
Closure of enhanced cycle prior to set time
Press and hold key P3
cycle and resume the conservation cycle.
Common functions
Function
1
Humidity control (for cells configured as CP
positive, CP positive plus or CP chocolate)
Press key P1
relative humidity in the cell.
With keys P5
the percentage of humidity displayed, with 6
selectable steps. Confirm the selected steps
by pressing
key P8
Turing on the cell light (if present)
2
Press the key P2
the cell and LED DL1
Press P2
The light comes on automatically when the
doors are opened.
3
Press key P4
printer which may be connected to the RS232
serial port. You can download the data onto a
USB key, which is then to be connected to a PC.
Data on temperature, data, and time are downloaded.
The memory holds recordings for 30 days with
measurements made at 15-minute intervals.
4
Selection of operating mode
Each CP can work in 3 different modes,
with default operating sets.
The possible modes are:
• Positive;
The operating mode can be varied only when the
machine is in standby.
To access mode selection, follow the instructions in
Par. 3.6 "PARAMETER PROGRAMMING" and
modify parameter 1-8 "Selection of CP model".
The machine is set in the factory with the mode
specified during the order phase.
All manuals and user guides at all-guides.com
Description
to end the enhanced
Description
to adjust the percentage of
and P6 you can modify
or wait 5 seconds without press the keys
to turn on the light in
.
again and the light goes off.
to print the register on a
• Negative; • Ciok (Chocolate)
Front panel screen
-18°C
No.: 12
No.: 12
Front panel screen
-
-18°C
No.: 12
No.: 12
18
SET : -20°C
: 12.00
UR%
4 5 6 +
SET : -20°C
: 12.00