irinox CP Serie Instrucciones Para El Uso página 58

4.3. CLEANING THE CONDENSER
In order for the conservation unit to work correctly and
efficiently, the air condenser must be kept clean to allow
free airflow. This operation should be done at least
every 30 days. This can be done by using a non-metal
brush to remove all the dust and lint from the condenser
fins. We suggest you use a vacuum cleaner to prevent
the dust from going into the environment. If there are
any greasy deposits, use a brush soaked in alcohol.
Do not scrape the surface using sharp or abrasive
objects.
Always use protective gloves, glasses and masks
to protect the respiratory tract during cleaning.
4.4. TROUBLESHOOTING
The electronic control of the machines is equipped with an
acoustic and visual signalling system that signals the presence
Diagnostics managed by the electronics:
DESCRIPTION
Code
DISPLAYED
ALS00
Loss of data
ALS01
Power outage
ALS02
Probe S1 faulty
ALS03
Probe S2 faulty
ALS04
Probe S3 faulty
ALS05
Low voltage
ALS06
Thawing
ALS07
Door 1 open
ALS08
Door 2 open
ALS09
Clock faulty
All manuals and user guides at all-guides.com
CAUSE
Loading of default data
Automatic restart when
power comes back on
The value of S2 + 5°C is
Cell temperature
acquired as a reference
probe faulty
value
The defrost cycle will run
for the time set in
Defrost temperature
parameter 3-9.
probe faulty
The fan is controlled when
the operation solenoid
valve is controlled (YV1)
Ambient temperature
Visual alarm only
probe faulty
Card power supply
Visual alarm only
voltage less than
After the time set in
parameter 2-2,
the temperature has
risen above the time
set in 2-1
The cell fan is shut off for
Upper cell door open
the time set in
parameter 2-5
The cell fan is shut off for
Lower cell door open
the time set in
parameter 2-5
The clock icon in the
display is crossed out.
The time for the next
defrost cycle is shown
Electronic card internal
with a decreasing value.
clock faulty
The defrost cycle is run
with the values set in
parameters 3-5 and 3-7.
26
Fig. 25
of an alarm which is registered in the alarms list.
Alarm reset and buzzer silence: press key P5
EFFECT
Slave-CPU
Slave-CPU
Slave-CPU
Slave-CPU
Slave-CPU
Slave-CPU
Slave-CPU
Slave-CPU
Slave-CPU
Slave-CPU
.
CYCLE
CARD
STOP
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO