Publicidad
Idiomas disponibles
Idiomas disponibles
EN
We recommend that you install the appliance only after the wall
cabinet has been mounted to avoid possible damage to the glass
top.
The safety clearance between the hob and any furniture
positioned above it must be at least 500 mm. (Fig. 8-A).
Place the 4 centring springs in the 4 corners of the metal base as
shown above.
3.3 INSTALLATION
The installer will find the items shown below when the box is
opened, to be installed as described on these pages.
Front view (Fig. 9)
1. Hob
2. Flap glass (opening - closing, extraction)
3. Grease filters
4. Condensate drip tray
5. Air outlet fitting
8
Rear view (Fig. 10)
1. Power supply box
2. Extraction outlet
3. Liquid drain cap
3.3.A INDUCTION HOB INSTALLATION
To leave the necessary clearance for the air piping, it is important to
install the induction hob with the centreline more than 300 mm from
any wall at the rear.
The induction hob can be installed in two ways, either resting on the
worktop or flush with the worktop.
To perform WORKTOP INSTALLATION, drill holes in the hob as
illustrated:
Fig. 11 - 60cm worktop
Fig. 12 - 80cm worktop
Publicidad
