Descargar Imprimir esta página

Fulgor Milano FHH 600 ID TC BK Instrucciones Para La Instalación Y El Uso página 53

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 124
Chef Cook function
The Chef Cook function allows you to prepare the cooking zones to
operate at fixed levels without dispersing energy when there is no
container placed on it.
As soon as a suitable vessel is placed in the cooking zones, these
are the set values:
Front left zone: Level 2
Rear left zone: Level 5
Rear right zone: Level 6
Front right zone: Level 8
Notes: Power levels cannot be set by the user.
The operating time limit for the Chef Cook function is 2 hours.
While the Chef Cook function is active, the "pot detection" symbol
is removed.
Activation:
• The hob is on.
• Touch the Chef Cook function key (7).
• Chef Cook mode is on.
• The cooking zone displays (2) and the power levels set from left
to right in a clockwise direction (2-5-6-8).
Deactivation:
• Touch the Chef Cook function key (7).
• Chef Cook mode is off.
• The power levels for all cooking zones are set to 0.
Automatic Heat-Up function (Fast heat-up)
This function lets you heat up a cold pot with full heating power and
automatically return to the desired cooking level. This enables faster
heating with less risk of burning food. The function can be activated
for power levels 1 to 8.
The time during which full power remains in the cooking zone
depends on the cooking level selected and mentioned in the table
below. The heating times are adapted for use with cold pots and
common household food quantities.
Cooking Level
1
2
3
4
5
6
7
8
9
P
Activation:
The pots are placed and the hob is active with a level between 1
and 8 for the cooking zone (2). Select the desired cooking zone.
Touch and hold the cooking level on the selection bar (4) for 3
seconds.
A flashing
alternating with the power set in the cooking zone
will appear on the Display (2). Increasing the power level of the
cooking zone, the Heat-Up function remains active with the new
Heat-Up Time (seconds)
48"
2' 24"
3' 50"
5' 12"
6' 48"
2'
2' 48"
3' 36"
Not available
Not available
cooking time setting;
Decreasing the power level of the cooking zone, the Heat-Up
function is deactivated.
Deactivation:
Touch and hold the cooking zone (2) for 3 seconds.
Fast heat-up is deactivated and the cooking zone is heated with the
cooking level set before.
Alternative:
Select a cooking level lower than the level currently set for this
cooking zone. Fast heat-up is deactivated. The cooking zone is
heated with the new cooking level.
Warming function (Keeping warm)
This function allows already cooked food to be kept warm at a
constant temperature.
This function is activated when the key
first time.
In the display (2) of the zone that is working with the "Warming"
function active, the symbol
will appear. If another cooking zone
is selected at the same time, the symbol
and it will then be possible to activate the function for this zone as
well. The function still remains active in the zone in which it has
already been set, as indicated on the Display (2). Press the key
(8) again to deactivate and switch off until bringing the level shown
on the Display (2) to 0.
If the "Warming" function is active on multiple cooking zones, first
select the desired zone via the Selection Display (2). This function
can also be deactivated via the Selection Bar (4) by setting the
Power Level to 0.
Pause function
The Pause function suspends any active function on the hob,
bringing the cooking power to 0. To activate the function press
||(Pause, 10) and the Cooking Zone Displays (2) will flash
To deactivate the function press || (Pause, 10), the key will start
flashing; press another key within 10 seconds and the function will
deactivate.
Deactivation restores the conditions of the hob before the pause
and the hob continues to work with the same settings as previously
set.
Caution: the hob must never be left unattended while the pause
function is active.
If the Pause Function is not deactivated after 10 minutes, the hob
will automatically switch off.
The Pause Function does not affect extraction.
Recall Function
This function lets you recover power levels, timer settings and fast
heat-up after the hob has been unintentionally switched off.
If the hob is switched off and on again within 6 seconds, all
previous settings (power levels, timer, fast heat-up) will be retrieved
automatically.
The recall function cannot be deactivated by the user.
(The hob will return to the levels set before the pause).
Activation:
The hob has been switched off.
EN
(8) is pressed for the
(8) will light up again
.
21

Publicidad

loading

Este manual también es adecuado para:

Fhh 800 id tc bk