Descargar Imprimir esta página

Fulgor Milano FHH 600 ID TC BK Instrucciones Para La Instalación Y El Uso página 43

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 124
Fig. 19.1
3.3.C CONSTRUCTION INSTRUCTIONS - REAR DIS-
CHARGE
To allow air to be discharged from the rear, the base of the cabinet
must not be discharged. The back panel must be discharged as
shown in Fig. 20 or, if necessary, removed.
The maximum possible length for any drawers provided under the
hob of approximately 550mm.
The depth of the drawers is indicative and based on a cabinet base
with standard dimensions.
Fig. 20
Fig. 20.1
3.3.D AIR OUTLET PIPE ASSEMBLY
In order to bring the air outlet to the desired position, pipes must
be installed using separately purchased fittings (Fig. 21). All piping
must pass under the base of the cabinet, in the baseboard riser
space.
Fig. 21 (Consult the Piping Installation Kit sheet,
Kit sold separately)
EN
11

Publicidad

loading

Este manual también es adecuado para:

Fhh 800 id tc bk