eSolutions eProWallbox Manual Del Usuario página 198

7 EXTERNAL ACCESSORIES CONFIGURATION
The external accessories compatible with
•
PowerMeter (DPM):
Management (DPM), a smart function which allows you to recharge the
electric vehicle using only the power available at home, modulating the
charging power and avoiding unpleasant blackouts.
•
MIDcounter: is a certified energy meter that allows you to monitor the
consumption of
WARNING
Do not install any accessory autonomously. Contact qualified
professionals who will perform the installation according to the
manufacturer's instructions.
7.1 PowerMeter (DPM)
PowerMeter (DPM)
Management (DPM) functionality, and it is configured during the installation phase.
DPM is smart functionality that allows you to recharge the electric vehicle using
only the power available at home, modulating the charging power, and avoiding
unpleasant blackouts. If you are using other appliances during the charging session,
the system can modulate the charging power towards the car, even suspending
temporarily the charging session. As soon as the other domestic appliances are
switched off, the session will resume.
It is also possible to change the maximum contractual power through the
eSolutions
•
Select the wallbox connected to the PowerMeter.
•
Click on the blue wheel in the top right corner to go to Settings.
•
Click on "Home Power".
•
Set your Contractual Power value in kW as indicated in your electricity
contract by moving the slider. This limit will not be exceeded by
is an energy meter that enables the Dynamic Power
eProWallbox
is an external meter that enables the Dynamic Power
Charging app, following the steps below:
eProWallbox
during each charging session.
27
Use r Man ual
are:
eProWallbox