Publicidad
Idiomas disponibles
Idiomas disponibles
ENGLISH
INSTRUCTIONS AND WARNINGS FOR THE REPLACEMENT OF PARTS
NOTE:
Read the following section of
the "user instruction manual" carefully
before replacing any part:
– Hazards and safety provisions during instal-
lation and commissioning, adjustments and
part replacement .
WARNING: Before carrying out any
replacement procedure, activate all the
safety devices provided and decide whether
staff at work and those in the vicinity should
be informed .
In particular, turn off the gas supply tap, cut
off the electricity supply using the master
switch and prevent access to all devices that
To carry out this operation, proceed as follows .
Turn off the gas supply tap .
1)
Remove the knob (C) .
2)
Undo the screws (A) and remove the control
3)
panel (B) .
C
A
18
REPLACING PARTS
REPLACEMENT OF THE BURNER NOZZLE
B
A
might cause unexpected health and safety
hazards if turned on .
When replacing worn parts, use original
spare parts only .
The manufacturer declines all responsibility
for injury or damage to components result-
ing from the use of non original parts, or ex-
traordinary work on the appliance which may
modify the safety requirements without the
Manufacturer's authorisation .
When ordering components, follow the in-
structions provided in the spare part cata-
logue .
Unscrew the nozzle (D) and replace it with
4)
the one suitable for the type of gas in use
(see table at back of manual) .
Replace the control panel (B) and the knob
5)
(C)on completion of the operation .
REPLACING PARTS
D
3413920_inst_GB
Publicidad
