Publicidad
Idiomas disponibles
Idiomas disponibles
ENGLISH
Hazard
Risk
of
electric
shock caused by live
components
Risk
of
electric
shock caused by live
parts
HAZARDS AND SAFETY PROVISIONS DURING USE
When using the appliance, watch out for the following hazards and provide for the countermeasures
indicated below:
► Source of hazard: heat
Hazard
Flammable mate-
rial placed on the
evacuation area
Contact with hot
working surfaces
Scalding caused by
hot liquids
8
Where or in which situations
does the hazard occur?
• Under protective panels
• Under the control panel
• Under protection covers
• On the appliance and on
the adjacent metal parts
• On the appliance and on
the adjacent metal acces-
sories
Where or in which situations
does the hazard occur?
In case of blocked flue
Accidental contact
Tampering with the drip
tray or fat collection drawer
Countermeasures
• Disable the power supply
before removing the protec-
tions
• Prevent the appliance from
being powered accidentally .
• Ensure that there is no volt-
age
• Before commissioning the
appliance, check that all
electric connections are not
damaged
• Use a power supply cable
with the specifications indi-
cated in section "Electrical
connection" of the installa-
tion manual .
• Before appliance commis-
sioning, check that electri-
cal connections are securely
fixed
• Before commissioning, make
sure that the appliance and
its metal accessories are con-
nected to a system for equi-
potential bonding
Countermeasures
• Training of personnel
• Training of personnel
and warning plate in
place on the appliance
and in the user manual
• Training of personnel
SAFETY
Safety device
• Pr o t e c t i o n
panels
• S y s t e m
switch- dis-
connector
Equipotential
bonding sys-
tem
Safety device
None
None
PPE as required
by the applica-
ble laws in the
country of use .
3413920_ut_GB
Publicidad
