Publicidad
Idiomas disponibles
Idiomas disponibles
ENGLISH
Lighting
IMPORTANT:
with this operation check that the well is not
raised and resting firmly on fixed part of ap-
pliance .
Turn on the gas supply tap .
1)
Turn the knob (A) clockwise (pos . 1) to turn
2)
on the electricity supply . The mains light (C)
goes out .
Press and turn the knob (B) anti-clockwise
3)
(pos . 3) to turn on the pilot light . Hold the
knob down for approximately 15 sec . to start
up the thermocouple .
Press and turn the knob (B) anti-clockwise
4)
(pos . 4) to turn on the burner .
Turn the knob (A) clockwise (pos . 1) to the
5)
temperature required . The temperature light
(D) comes on . When it reaches the tempera-
ture, the light goes off .
Turning off
Press the knob (B) and turn it clockwise (pos .
1)
5) to turn off the burner . The pilot light will
remain on to allow the burner to be re-lit .
Press the knob (B) and turn it clockwise (pos .
2)
6) to turn off the pilot light .
Turn the knob (A) clockwise (pos . 2) to turn
3)
off the electricity supply . The mains light (C)
goes out .
Turn off the gas supply tap .
4)
Cut off the mains electricity supply using the
5)
appliance's master switch .
20
SWITCHING THE APPLIANCE ON AND OFF
Before proceeding
USE AND OPERATION
1
A
A
2
3
B
6
C
B
A
D
4
5
3413920_ut_GB
Publicidad
