Publicidad
Idiomas disponibles
Idiomas disponibles
REPLACING PARTS
To carry out this operation, proceed as follows .
Turn off the gas supply tap .
1)
Remove the knob (C) .
2)
Undo the screws (A) and remove the control
3)
panel (B) .
Undo the screw (E) .
4)
C
A
To carry out this operation, proceed as follows .
Turn off the gas supply tap .
1)
Remove the knob (C) .
2)
Undo the screws (A) and remove the control
3)
panel (B) .
Unscrew the union (D) .
4)
C
A
3413920_inst_GB
REPLACING THE BURNER AIR BUSHING
B
REPLACEMENT OF THE PILOT LIGHT INJECTOR
B
Extract the bushing (D) and replace it with
5)
the one suitable for the type of gas in use
(see table at back of manual) .
Tighten the screw (E) .
6)
Replace the control panel (B) and the knob
7)
(C) on completion of the operation .
A
Remove the nozzle (E) and replace it with the
5)
one suitable for the type of gas in use (see
table at back of manual) .
Retighten the union (D) .
6)
Replace the control panel (B) and the knob
7)
(C) on completion of the operation .
A
ENGLISH
D
E
E
D
19
Publicidad
