Publicidad
Idiomas disponibles
Idiomas disponibles
ENGLISH
Change the oven burner pilot light nozzle (see
5)
page 18).
If necessary, replace the oven burner bushing
6)
(see page 18).
Adjust the gas control valves of the top burn-
7)
ers (see page 14) and the oven burner (see
page 13) to the minimum setting.
Remove the testing gas sticker from the name-
8)
plate (B) and apply the new one to identify the
gas being used.
Remove the sticker from the appliance and
9)
apply the new one (C) with the category of the
country of installation.
NOTE: After completing the operation,
check for any gas leaks or faults.
WARNING: The connection must be
made by authorised, skilled personnel, in
accordance with the applicable legal re-
quirements, using appropriate and speci-
fi ed materials. The appliance is supplied
with 230V1~N operating voltage.
HAZARD: Before doing any work, turn
off the general power supply.
B
12
ELECTRICAL CONNECTION
C
C
D
HANDLING AND INSTALLATION
C
AL
II2H3B/P: G20/20mbar, G30/30mbar
AL
II2H3+: G20/20mbar, G30-G31/28_30-37mbar
AT
II2H3B/P: G20/20mbar, G30/50mbar
AT
II2H3P: G20/20mbar, G31/50mbar
BE
II2E+3+: G20-G25/20-25mbar, G30-G31/28_30-37mbar
BE
II2E+3B/P: G20-G25/20-25mbar, G30/30mbar
BE
II2E+3P: G20-G25/20-25mbar, G31/37mbar
BE
II2E+3B: G20-G25/20-25mbar, G30/30mbar
BG
II2H3B/P: G20/20mbar, G30/30mbar
BG
II2H3+: G20/20mbar, G30-G31/28_30-37mbar
G20
kW
m3/h
mbar
G31
G25
kW
m3/h
mbar
G30
mbar
kW
Kg/h
B
G20
kW
m3/h
mbar
G31
G25
m3/h
kW
mbar
G30
mbar
kW
Kg/h
Connect the appliance to the mains power sup-
ply as follows:
If not already in place, install an automatic
1)
switch-disconnector (A) close to the appli-
ance, with the following characteristics:
– Thermal release (see table in the Annex sec-
tion for adjustment instructions).
– Reed switch curve B (IEC 60898-1).
– Residual current release set at 30 mA
Pull off the knob (B).
2)
A
G
E
IS
II2H3B/P: G20/20mbar, G30/30mbar
IS
II2H3+: G20/20mbar, G30-G31/28_30-37mbar
3P
IT
II2H3+: G20/20mbar, G30-G31/28_30-37mbar
IT
II2H3B/P: G20/20mbar, G30/30mbar
IT
II2H3P: G20/20mbar, G31/37mbar
LT
II2H3+: G20/20mbar, G30-G31/28_30-37mbar
LT
II2H3B/P: G20/20mbar, G30/30mbar
LT
II2H3P: G20/20mbar, G31/37mbar
LU
II2H3B/P: G20/20mbar, G30/30mbar
LU
II2H3+: G20/20mbar, G30-G31/28_30-37mbar
A
01
0051
kW
mbar
Kg/h
~
~
~
TYPE
01
0051
kW
mbar
Kg/h
~
~
CE n.
~
TYPE
3386390_inst_GB_rev.1
rif.
CE n.
rif.
Publicidad
