Publicidad
Idiomas disponibles
Idiomas disponibles
ENGLISH
Switching on the appliance
Open the gas supply tap.
1)
Press the knob
2)
(A)
(pos.
) to turn on the pilot light.
1
Hold the knob down for approximately 15 sec-
3)
onds to start up the thermocouple.
Turn the knob (A) anti-clockwise (pos.
4)
turn on the burner.
Press the knob and turn it gradually anti-clock-
5)
wise to adjust the power of the fl ame down to
the minimum setting.
Turning off the appliance
Turn the knob (A) clockwise (pos. 1) to turn
1)
the burner off . The pilot light will remain on to
allow for the burner to be re-lit.
Press the knob and turn it clockwise (pos. 3) to
2)
turn off the pilot light.
Turn off the tap to ensure safety.
3)
Switching on the appliance
IMPORTANT: At fi rst switch-on, pre-
heat as appropriate.
Open the gas supply tap.
1)
Press and turn the knob (A) anti-clockwise
2)
between
and
will ignite the pilot fl ame. Hold the knob down
for a few seconds. Repeat the sequence if the
pilot fl ame does not ignite.
Turn the knob (A) anti-clockwise to "
3)
light the burner..
Turn the knob (B) anti-clockwise to the tem-
4)
perature desired .
IMPORTANT: When the knob (B) is
5)
on MIN, the burner is switched on in ther-
mostatting function. To stop the heating,
you need to turn the knob (A) back on "
".).
20
SWITCHING THE TOP BURNERS ON AND OFF
and turn it anti-clockwise
SWITCHING THE OVEN ON AND OFF
, creating the spark that
) to
2
" to
A
USE AND OPERATION
A
A
3
A
B
B
3386390_ut_GB
1
2
Publicidad
