Publicidad
Idiomas disponibles
Idiomas disponibles
SAFETY
NOTE: Only applies to electrical appliances.
► Source of hazard: Electric power
Hazard
Risk
of
electric
shock caused by
live components
Risk
of
electric
shock caused by
live parts
3386390_ut_GB
Where or in which situations
does the hazard occur?
• Under protective panels
• Under the control panel
• Under protection covers
• On the appliance and on
the adjacent metal parts
• On the appliance and on
the adjacent metal acces-
sories
Countermeasures
• Operations to the electric
system may be carried out
by authorised and qualifi ed
staff only, in accordance
with the relevant applica-
ble laws.
• Specialist procedure
• Comply with the correct in-
stallation requirements as
per section "Installing the
appliance" of the installa-
tion manual.
• Disable the power supply
before removing the pro-
tections
• Prevent the appliance from
being powered accidental-
ly.
• Ensure that there is no volt-
age
• Before commissioning the
appliance, check that all
electric connections are
not damaged
• Use a power supply cable
with the specifi cations indi-
cated in section "Electrical
connection" of the installa-
tion manual.
• Before appliance commis-
sioning, check that electri-
cal connections are secure-
ly fi xed
• Before
commissioning,
make sure that the appli-
ance and its metal acces-
sories are connected to a
system for equipotential
bonding
ENGLISH
Safety device
• P r o t e c t i o n
panels
• S y s t e m
s w i t c h - d i s -
connector
Equipotential
bonding
sys-
tem
11
Publicidad
