Össur PROPRIO FOOT PSX02 Instrucciones Para El Uso página 8

Advanced Setup
Advanced functions like stair and ramp adaptation can be finetuned in the Össur Logic app.
Table 2 - Initial setup
Procedure Indicator appearance
Initial setup
Ankle Alignment
Auto Adjustment
USAGE
Device operation
Turning the Device On
1. Push and hold the power button for longer than 1 seconds.
2. The device will play three ascending tones and vibrate.
3. When the status indicator flashes green, the device is ready to use.
Turning the Device Off
1. Push and hold the power button for longer than 4 seconds.
2. The device will play three descending tones and turn off.
Connecting to the App
1. Turn on the device.
2. Open the app and follow the instructions in the app.
Note: The required PIN code can be found on the device label at the back of the device (see. Descriptions of
Symbols section).
Battery
Warning: A damaged power supply can lead to electric shock.
Warning: Always disconnect the power supply from the device before donning.
Caution: Only use the provided power supply. Do not use a different power supply.
Caution: The Battery Pack charge connector is Nickel-plated which may cause allergic reactions.
The device can be charged whether it is turned ON or OFF.
Device Status
Initial Setup required
Auto-Adjustment required
Heel Height Adjustment/Ankle
Alignment required
Procedure Initiation Confirmed
Procedure in progress
Procedure Completed
Procedure Failed
8