8.2.12 Relief function
When weight is evenly placed on the heel without movement for more than
2 seconds, the tip of the foot lowers to reach a more natural foot position.
Possible applications include sitting with the heel in front of the knee axis,
standing while leaning against something, and standing on a downward slop
ing surface.
8.3 MyModes
With the help of adjustment software, the prosthetist can activate and configure MyModes in addi
tion to the basic mode. These can be selected by using the remote control or motion patterns.
Switching by using motion patterns has to be activated in the adjustment software by the prosthet
ist.
The MyModes are intended for specific motion patterns or postures (e.g. golfing, ...). Settings
can be adjusted using the Cockpit app or remote control (see Page 71).
8.3.1 Switching MyModes with the cockpit app
INFORMATION
Bluetooth on the prosthesis must be turned on in order to use the cockpit app.
If Bluetooth is switched off, it can be turned on by turning the prosthesis upside-down or by
connecting/disconnecting the battery charger. Bluetooth is then turned on for approx. 2
minutes. During this time, the app must be started and used to establish a connection. If
required, Bluetooth on the prosthesis can be switched on permanently afterwards (see
Page 71).
INFORMATION
If the Volume parameter is set to '0' in the Cockpit app or using the remote control, there are
no beep signals (see Page 69).
Once a connection to a prosthesis has been established, the cockpit app can be used to switch
between the MyModes.
66