Status Signals; Technical Data - Ottobock 1B1-2-Meridium Instrucciones De Uso

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 165

13.2.4 Status signals

Battery charger is connected
LED on
LED on bat­
power
tery charger
supply
Battery charger disconnected
Beep
Vibration
signal
signal
1x short
1x short
Battery charge level
Battery char­
ger
Battery is being charged, battery charge level is less than 50%
Battery is being charged, battery charge level is over 50%
Battery is fully charged (or connection with product is interrupted).
Take note of the confirmation signal for differentiation.
When the battery charger is connected or disconnected, a self-test is conduc­
ted and confirmed by a beep and vibration signal.
The battery is fully charged if this signal is heard.
If no signal is emitted, the connection to the product is interrupted.

14 Technical data

Environmental conditions
Storage and transport in original packaging
(≤3 months)
Storage and transport without packaging
(<48 hours)
Long-term storage (>3 months)
Operation
Charging the battery
Product
Reference number
Maximum heel height that can be set
Dorsiflexion with heel height of
1 cm/0.39 inches
Plantar flexion with heel height of
1 cm/0.39 inches
Mobility grade according to MOBIS
80
Event
Power supply and battery charger operational
Event
Self-test completed successfully. Product is operational.
-20 °C/-4 °F to +40 °C/+104 °F
-25 °C/-13 °F to +70 °C/+122 °F
Max. 93% relative humidity, non-condensing
-20°C/-4°F to +20°C/+68°F
Max. 93% relative humidity, non-condensing
-10°C/+14°F to +40°C/+104°F
Max. 93% relative humidity, non-condensing
+10 °C/+50 °F to +45 °C/+113 °F
1B1-2
50 mm/2 inch
14.5°
22°
2–4

Publicidad

Tabla de contenido
loading

Tabla de contenido