Publicidad
Figure 125. Rewinding tape into cartridge
1
2
3. Turn the supply reel ( 4 ) clockwise.
4. Continue spooling into the cartridge until the tape is taut and remains within the flanges of the tape
guiding rollers. Turn the supply reel ( 4 ) 10 turns. Ensure that you do not stretch the tape.
5. Go to "Ending procedure" on page 262.
Full height drive: No apparent failure or damage to tape
About this task
Note: If the cartridge in the drive is an INPUT tape that contains ACTIVE or 'ONLY COPY' data (there is no
backup), eject commands that are issued at the host fail to unload the tape, and power-cycling the drive
fails to eject the cartridge, make no further attempts to unload this tape. Call Technical Support and open
a PMR if one is not already open, to initiate the process of sending the drive with the loaded cartridge in
for recovery.
Procedure
1. Set the drive on its left side with the head and tape path facing up.
256 IBM TS4300 Tape Library Tipo de máquina 3555: Guía del usuario
Loader motor worm gear
Outer guide rail (WARNING: Do
Not Touch)
3
Takeup reel motor
4
Supply reel motor
IBM Confidential
Publicidad
