Publicidad
Idiomas disponibles
Idiomas disponibles
AIR BLEEDING FROM FUEL SUPPLY CIRCUIT
IMPORTANT
GB
This operation must be carried out after
each fuel filter cartridge replacement.
Follow the procedure below:
IMPORTANT
Turn off the engine and remove the
ignition key. Wait at least 6 minutes
before disconnecting the negative
battery cable.
1 - Carry out the operation with the engine
cold.
2 - Avoid contact with hot engine parts
and fuel. Wear appropriate gloves and
clothing.
3 - Prepare a container with appropriate
capacity under the fuel filter.
4 - Partially loosen the screw (E) to allow
the fuel to be bled to drain.
5 - Manually activate the pump (F) until
the fuel drained has no air bubbles.
6 - Tighten the screw (E).
IMPORTANT
Thoroughly dry the fuel residues before
starting the engine.
English
E
CAUTION - WARNING
Do not use the starter motor to try to
bleed air from fuel circuit.
CAUTION - WARNING
Do not loosen high-pressure pipe
unions of fuel supply circuit.
52
R754ISE5
F
42432106F
Publicidad
