Publicidad
Idiomas disponibles
Idiomas disponibles
CAUTION - WARNING
To replace the belt on an engine
GB
equipped with automatic tensioner
(see fig. 3), it is recommended to
contact the manufacturer of the vehicle
in which the engine is installed or a
workshop authorised by VM MOTORI
STELLANTIS EUROPE.
IMPORTANT
Turn off the engine and remove the
ignition key. Wait at least 6 minutes
before disconnecting the negative
battery cable.
1 - Let the engine cool down adequately to
avoid the risk of burning.
2 - Turn the automatic tensioner (A)
counter-clockwise to loosen the belt (B)
and remove it from the tensioner pulley
(C) fig.3.
3 - Remove the belt (B) and replace it
fig.3.
Automatic tensioner (A)
English
Fig.3 shows an example of R754ISE5 accessory belt-rotation configuration
Fig.3
CAUTION - WARNING
Before tightening the belt make sure
that it is correctly positioned in the
pulley seats.
CAUTION - WARNING
Before restarting the engine, make sure
there are no tools or other material
near the moving parts.
IMPORTANT
Do not dump any polluting material
in the environment. Carry out their
disposal in compliance with the
legislation in force.
Accessory belt (B)
Tensioner pulley (C)
56
R754ISE5
Accessory belt (B)
Accessory belt (B)
42432106F
Publicidad
