Publicidad
Idiomas disponibles
Idiomas disponibles
Checking that your microwave oven is operating correctly
The following simple procedure enables you to check that your microwave oven is
working correctly at all times.
If you have any problems, see the "Troubleshooting" section on pages 38 to 41.
NOTE
The microwave oven must be plugged into an appropriate wall socket. The
turntable must be placed in the microwave oven. If a power level other than the
maximum (100 % - 900 W) is used, the water takes longer to boil.
Open the oven door by pulling on the right upper or bottom side of the door.
Place a glass of water on the turntable. Close the door.
12 English
Press the Start/+30s button and set the
time to 4 or 5 minutes, by pressing the
Start/+30s button the appropriate number
of times.
The oven heats the water for 4 or
5 minutes. The water should then be boiling.
Setting the time
When power is supplied, "88:88" and then "12:00" is automatically displayed on
the display.
Please set the current time. The time can be displayed in either the 24-hour or 12-
hour notation. You must set the clock:
•
When you first install your microwave oven
•
After a power failure
NOTE
Do not forget to reset the clock when you switch to and from summer and winter
time.
2
1
4
3
5
To display the time in the...
1.
24-hour notation.
12-hour notation.
Press the Clock button once or twice.
2.
Turn the Dial Knob to set the hour.
Press the Clock button.
3.
4.
Turn the Dial Knob to set the minute.
5.
When the right time is displayed, press
the Clock button to start the clock.
The time is displayed whenever you are
not using the microwave oven.
Publicidad
