Publicidad
Idiomas disponibles
Idiomas disponibles
Troubleshooting
Service Limit Feature
In addition to the standard safety controls, such as the high
pressure cutout, your Manitowoc ice machine features
built-in Service Limits, which will stop the ice machine if
conditions arise which could cause a major component
failure.
Before calling for service, re-start the ice machine using the
following procedure:
1. Press the Power button to turn off the ice machine, then
press the Power button again to start the ice machine.
A. If the Safety Limit Feature has stopped the ice
machine, it will restart after a short delay. Proceed
to step 2.
B. If the ice machine does not restart, see "Ice machine
does not operate" on the previous page.
2. Allow the ice machine to run to determine if the
condition is recurring.
A. If the ice machine stops again, the condition has
recurred. Call for service.
B. If the ice machine continues to run, the condition
has corrected itself. Allow the ice machine to
continue running.
32
Part Number 0000017452 Rev 00 06/22
Section 5
Publicidad
