Cleaning And Disposing Of The Machine; Safety Devices On The Machine; Notes On Safety Devices; Safety Device That Prevents The Vacuum Pump From Overheating - Orved evox 25 Manual De Uso

1.4.9 CLEANING AND DISPOSING OF THE MACHINE
ATTENTION!
• Clean the machine regularly, following the instructions in this manual.
• Use and handle detergents according to the manufacturer's instructions.
• Demolish and dispose of the machine, its components and detergents used to clean the machine, in compliance with
applicable Standards.
• Cleaning and user maintenance shall not be made by children without supervision.
1.5 SAFETY DEVICES ON THE MACHINE
1.5.1 NOTES ON SAFETY DEVICES
• Before every machine start-up, check that all the protection and safety devices are present, efficient and functional.
The machine must not be used if one or more safety device is missing or damaged.
• Only qualified and trained personnel must perform maintenance and/or repairs or replace safety devices.
• The safety devices must not be excluded or disabled.
The machine comes standard with the following safety devices:
• Safety device to prevent the vacuum pump from overheating.
• Device against overheating of the sealing bar.
• Vacuum pump fan cover.
1.5.2 SAFETY DEVICE THAT PREVENTS THE VACUUM PUMP FROM OVERHEATING
Your vacuum packing machine is equipped with a safety system that eliminates the risk of the pump motor overheating,
which could be triggered by galling or a defect, by means of special temperature sensors placed on the motor winding
and a number of devices inside the electronic power board.
1.5.3 DEVICE AGAINST OVERHEATING OF THE SEALING BAR
The machine is equipped with a device that eliminates the risk of overheating and burning of the sealing bar.
1.5.4 FAN COVER FOR THE VACUUM PUMP
The vacuum pump has a safety cover that prevents contact with the cooling fan.
Rev. 02 - 05/2016 - Cod. 1500015 - Instruction manual for vacuum chamber packaging machines EVOX 25 / EVOX 25 H
GENERAL SAFETy STANDARDS AND ACCIDENT PREVENTION
11