Correct Operation Checks - Nussbaum TC 310 Manual De Instrucciones

ENGLISH • Instructions manual
CODE 3014096
CODE 3014042
CODE 3020456
WARNING:
Unreadable and missing warning labels must be replaced immediately.
Do not use the tyre changer if one or more labels are missing.
Do not add any object that could prevent the operator from seeing the labels.
Use the code in this table to order labels you need.
Once the connections described above have been made (See "Installation"), check to make sure the tyre changer works properly by carrying
out the following procedures:
1) Press pedal (1, Fig. L) down to its middle position (see Fig. M1): the table top (2, Fig. L)
should turn clockwise at the low speed; press the pedal all the way down (see Fig. M1): the table
top should turn clockwise at high speed; pull the pedal up (see Fig. M1): the table top should
turn anticlockwise.
2) Open the bead loosener arm (4, Fig. L) manually and depress the bead loosener pedal (3, Fig.
L): the bead loosener will close.
CODE 3014057

9. CORRECT OPERATION CHECKS

CODE 3020244
CODE 4-402938
31
CODE 3014094
anti-clockwise
0
clockwise (1-speed)
clockwise (2-speed)
TC 310 - Liga C 250
M1