Corghi ProLine Truck 150 Manual De Uso página 108

6. turn the wheel to the point where the first outer weight (W1) should be applied behind
a spoke.
To select the exact position of the weight W1 relative to the W imbalance, use 6 o'clock
as the reference if the "LAS" configuration is active and 12 o'clock if the "H12" or "CLP"
configuration is active.
7. Confirm by pressing P1
8. The machine displays the message in figure 27b;
9. turn the wheel to the point where the second outer weight (W2) should be applied
behind a spoke.
To select the exact position of the weight W2 relative to the W imbalance, use 6 o'clock
as the reference if the "LAS" configuration is active and 12 o'clock if the "H12" or "CLP"
configuration is active.
10. Confirm by pressing
11. by manually turning the wheel, the two calculated imbalance values are displayed in
alternation on the display relevant to the outer sidewall as the angular position of the
wheel changes. Apply each of the two balancing weights as described in the chapter
"APPLICATION OF BALANCING WEIGHTS IN ALU 1P OR ALU 2P PROGRAMS".
Notes:
- You can quit the Hidden weights program procedure at any time by simply pressing
the keys [F+P5]
- The Hidden Weights program is automatically deactivated by performing a wheel spin.
108
;
;
+ .
27b
User manual ProLine Truck 150