Signalling; Error Codes - Corghi ProLine Truck 150 Manual De Uso

out the adjustment of such laser.
To exit the test program, press [F+P9]
rEt Returns to SERVICE mode
This Test Program menu option returns the machine to SERVICE mode.
When abnormal operating conditions occur, the machine emits two types of signal:
• Error - Triple acoustic warning
• Warning - Double acoustic warning
The Error signal is always accompanied by a triple beep indicating that the machine
cannot run the command given by the operator, or, during operation, conditions were
encountered that prevent the action in progress from continuing.
The Warning signal is always accompanied by a double beep that prompts the operator
to perform a particular action, or refers to the fact that the machine has changed status.
In any case, the requested operation is not prevented, or the current function is
completed.
The machine indicates error conditions by alternating the display of an error code
with a brief description (in English) of the error cause. The list of error codes and brief
descriptions is provided in table T11. The machine displays the code for different times
depending on the error code itself, as indicated in the column "Error display" in table
T11.
Error Brief
code description
000 to
INT ERR
009
010 REV SPN
011 SPD LOW
012 NO STP
014 NO SPN
124

SIGNALLING

Error codes

Table T11: Error codes
Error display
(1)
Machine parameters
Reverse rotation of the
Wheel rotation too low
The wheel cannot be
stopped at the end of
The machine DOES NOT
+
Description
internal error.
wheel.
the spin.
spin the wheel.
User manual ProLine Truck 150
.
Notes
Contact technical support.
Contact technical support.
Contact technical support.
Check the mains voltage. If the
checks do not lead to any results,
contact technical support.
Contact technical support.