Corghi ProLine Truck 150 Manual De Uso página 121

DISPLAY OF CURRENT
MATERIAL
To display the current type of material
briefly press [F+P2]
. The type of material currently selected
is displayed for three seconds, after
which the machine returns to display SEr
SEr.
Press any key to exit the display of the
current type of material without waiting
three seconds.
CHANGE OF CURRENT
MATERIAL
To change the current type of material
hold down +
seconds. The new type of material will
be displayed, after which the machine
returns to display SEr SEr.
The type of material
maintained even after the machine has
been turned off.
Note: if lead has been selected as
material, at every machine start-up a
message indicating the selection of this
material will appear for one second after
the initial test. This signal will not be
viewed if Iron/Zinc is selected as material.
[F+P3] Exit the SERVICE
mode
This key allows the machine to exit
SERVICE mode and return to NORMAL
mode.
[F+P4] Read spin
number counter
By pressing this key, the total number
User manual ProLine Truck 150
TYPE OF
of balancing spins run by the machine is
displayed. The number of spins is shown
on both displays. Figure 33 shows an
example of a machine's display that has
run 1,234 balancing spins.
+
Balancing spins that were interrupted
TYPE OF
are not included in the total count of
balancing spins (for example, those
stopped by pressing [P10] key Stop
for three
the wheel guard) and all those run in the
SERVICE mode.
selected is
The Parameter menu is intended for
technical
therefore, is not described in this
manual. Access to this menu is protected
by password.
This key is not currently used in SERVICE
mode.
This menu allows you to run tests for
some machine functions. The Menu has
the following options:
• EnC Encoder disc test.
• rPM Number of shaft rpm test.
• SiG Pick-up data acquisition chain test.
Fig. 33: Display of the number of
balancing spins
or those interrupted by raising
[F+P5] Parameters
support personnel
[F+P6] Not used
[F+P9] MENU Test
Programs
and,
UK
121