Technical Data - Corghi ProLine Truck 150 Manual De Uso

- General utility programs:
• Calibration
• Service
• Diagnostics
- Two separate working environments to allow two operators to work at the same time
without having to set the data again.
- RPA, automatic wheel positioning in the position where the balancing weight has to be
applied.
- Visual inspection function that allows to visually check for roundness defects of the wheel
and rim.
- possibility to select the position for applying the adhesive weight:
• Vertical plane in the lower part of the wheel (H6) using the LASER line
• Vertical plane at upper part of wheel (H12)
• CLIP: using the weight-holder terminal in the ALUP balancing programs and in CAR/SUV
wheels (in all the other H12 balancing programs)
- LED illuminator (if present)
- LASER indicator (if present)
Power supply voltage(1)
Three-phase motor with inverter
Balancing speed
Maximum displayed imbalance value
Car/SUV wheel work resolution
Truck wheel work resolution
Shaft diameter
Working environment temperature
Storage temperature
Storage relative humidity
Noise
Weight of the electrical/electronic
components
(1) The voltage supply must be specify at the order. It is not possible to connect a machine
with supply voltage of 230 V to a mains of 110 V and vice versa.
84

TECHNICAL DATA

1Ph 230 V 50/60 Hz
1Ph 110 V 50/60 Hz
0.37 kW
120 RPM with car/SUV wheels
80 RPM with truck wheels
999 g.
X1 (1 g. or 0.1 ounces)
X5 (5 g. or 0.25 ounces)
X1 (10 g. or 0.5 ounces)
X5 (25 g. or 1 ounce)
40 mm
from 0 to +45 °C
from -10 to +60 °C
20% ÷ 95% without condensation
< 70 dB(A)
13 Kg
User manual ProLine Truck 150