Kichler Kimberley Manual De Instrucciones página 11

HANGING THE FAN
Step 10. Install the 4, 4 watt LED lamps (2700K) (included). Attach the decorative
scroll assembly onto the top of the motor housing with the three screws provided.
Then tighten the set screws on the decorative scroll holder. (Fig. 11)
Step 11. Lift the motor assembly into position and place the hanger ball into the
ceiling mounting bracket.
Rotate the entire assembly until the "Check Tab" has dropped into the
"Registration Slot" and seats firmly. (Fig. 12)
The entire motor assembly should not rotate (left or right) when seated properly.
WARNING: Failure to reattach the cross pin and seat the "Check Tab" can cause
the fan to fall from the ceiling during operation. Take special care to make sure this
pin is reattached.
Decorative scroll
assembly
Fig. 11
Registration slot
Fig. 12
Set screws
Screws
Lamps
Check tab
11
Kimberley |
™