Attaching The Fan Blades - Kichler Kimberley Manual De Instrucciones

ATTACHING THE FAN BLADES

CAUTION: Remove the five rubber shipping blocks attached to the face of
the motor. These blocks keep the motor from shifting during shipping and
MUST be removed during installation.
Step 1. Attach a blade to a blade bracket using the screws and fiber
washers provided. (Fig.18)
Make sure the blade is straight when set on the blade bracket. Tighten
each mounting screw and then repeat this procedure for each blade.
Step 2. Attach each blade assembly to the motor using the mounting
screws provided with the blade brackets hardware. (Fig 18)
16 | KICHLER.COM
Slot
Blades bracket
Screws
Fig. 18
Screws
Fiber
washers
Blade