Installing The Light Bulbs And Glass Shade - Kichler Kimberley Manual De Instrucciones

INSTALLING THE LIGHT BULBS & GLASS SHADE
Step 1. Install 3, 4 Watt, LED lamps (3000K) (included).
Step 2. Remove the decorative nut and metal nut from the light kit. Place
glass shade over thelight kit stem, secure with the metal nut (rubber side
on the top) and decorative nut. Do not overtighten. (Fig. 21)
Step 3. Restore power and your light kit is ready for operation.
Lamps
Light kit
Glass shade
Metal nut
Decorative nut
Fig. 21
19
Kimberley |
™