Installing The Light Kit - Kichler Kimberley Manual De Instrucciones

INSTALLING THE LIGHT KIT

NOTE: Before starting installation, disconnect the power by turning off
the circuit breaker orremoving the fuse at fuse box.
Step 1. Loosen the 3 screws from the mounting plate.
Step 2. Raise and hold the light kit close to the mounting plate. Connect
the white wire connectors from the light kit and fan. Follow the same
procedure with the black wire connectors. (Fig. 20)
Step 3. Tuck connections neatly into mounting plate, Place the light kit
key holes over the 3 screws previously loosened from the mounting plate,
turn light kit until it locks in place at the narrow section of the key holes.
secure by tightening the 3 screws previously loosened.(Fig. 20)
Connection plugs
Mounting plate
Light kit
Screws
Fig. 20
18 | KICHLER.COM