Hanging The Fan - Kichler Kimberley Manual De Instrucciones

HANGING THE FAN

REMEMBER to turn off the power before you begin.
To properly install your ceiling fan, follow the steps below.
Step 1. Remove the decorative canopy bottom cover from the canopy by turning
the cover counter clockwise. (Fig. 5)
Step 2. Remove the ceiling mounting bracket from the canopy by removing (and
save one of the two screws. Loosen the remaining screw by a half turn. (Fig. 5)
Step 3. Pass the 120 volt supply wires from the ceiling outlet box through the
center of the ceiling mounting bracket. (Fig.6)
Step 4. Attach the ceiling mounting bracket to the outlet box using the screws and
washers included with the outlet box. (Fig. 6)
Fig. 5
CUL Listed
outlet box
Ceiling
mounting
bracket
Hook
120V Wires
Fig. 6
Ceiling
mounting
bracket
Ceiling
canopy
Canopy
cover
Washers
Mounting screws
(supplied with
electrical box)
7
Kimberley |
™