Installing The Mounting Plate - Kichler Kimberley Manual De Instrucciones

INSTALLING THE MOUNTING PLATE

Step 1. Remove 1 of the 3 screws from the mounting ring and loosen
the other 2 screws (do not remove). (Fig. 19)
Step 2. Place the key holes on the mounting plate over the 2 screws
previously loosened from the mounting ring, turn mounting plate
until it locks in place at the narrow section of the key holes. Secure by
tightening the 2 screws previously loosened and the one previously
removed. (Fig. 19)
Mounting
plate
Fig. 19
Mounting ring
Screws
17
Kimberley |
™