Finishing The Installation - Kichler Kimberley Manual De Instrucciones

FINISHING THE INSTALLATION

Step 1. Tuck all the connections neatly into the ceiling outlet box.
Step 2. Slide the canopy up to the mounting bracket and place one of the key hole
slots over the mounting screw on the mounting bracket. Rotate the canopy until the
screw head locks inplace at the narrow section of the key hole. See figure 17.
Step 3. Align the remaining circular hole on thecanopy with the remaining hole on
the Ceiling Mounting Bracket. Insert and tighten the mounting screw you removed
earlier and the mounting screw from Step 2 above. Now, attach the canopy cover to
the mounting screw heads by inserting the screw heads into the bottom side of the
canopy cover and rotating the cover clockwise.
NOTE: Adjust the canopy screws as necessary until the canopy and canopy cover
are snug. (Fig.17)
Outlet box
Ceiling
mounting
bracket
Screws
Fig. 17
Screws
Canopy
Canopy cover
15
Kimberley |
™