Installation Of Safety Support - Kichler Kimberley Manual De Instrucciones

INSTALLATION OF SAFETY SUPPORT

(Required for Canadian installation ONLY)
A safety support cable is provided to help prevent the ceiling fan from faIling.
Step 1. Attach the provided wood screw and washers to the ceiling joist next to the
mounting bracket but do not tighten. (Fig. 13)
Hanger bracket
Safety cable
Step 2. Adjust the length of the safety cable to reach the screw and washers by
pulling the extra cable through the cable clamp until the overall length is correct, put
the end of the cable back through the cable clamp, forming a loop at the end of the
cable. Tighten the cable clamp securely. Now, put the loop in the end of the safety
cable over the wood screw and under the washer. Tighten the wood screw securely.
Fig. 13
NOTE: Although the safety support cable is required for Canadian installations only.
It's a good idea to make the attachment with any installation.
12 | KICHLER.COM