Manual Resistance Reading; Cleaning The Injectors - alfatest Multijet Pro Manual Del Usuario

Injetor – Denso 0390921 17
8J0 – 3
Electrical Resistance: (approx) 12,5
Working pressure: 3,5 Bar
Test Duration time: 30 seg
Injection time: 2 ms
Frequency: of 1,000 to 15,000 rpm
Flow: 55 ml, average de 5%
10 – MANUAL RESISTANCE READING
Performs reading of the injector(s) resistance and allows the user to observe the resistance manually.
In this procedure, there is no actuation of the injector(s).
Conduction:
For this test, there is no need to assemble the injectors under the test tubes
1)Through the keys
The Multijet will check the resistance of the injectors, and, trough the keys
between the results of each injector.
To end the test, press Stop/Pausa
CONDUCTION OF ANY OTHER TEST REQUIRED MUST BE DONE WITH THE INJECTORS DULY

5.0 - CLEANING THE INJECTORS

The ultrasound injector cleaning process, removes impurities from any solid surface with the least possibility of
causing damages to the object, removing all soluble and insoluble residues found in the orifices, gaps and
enclosures inaccessible to other means.
Some of the problems associated with dirty injectors are: irregular functioning of the engine, high fuel consumption,
loss of power or difficulty of cold starting.
Yamaha XT 660 Single-cylinder

, select the test "10" and press the Start/Cont.
or "Function" key. .
MOUNTED UNDER THE TEST TUBES.
29
MULTIJET PRO
.
will be possible to browse