alfatest Multijet Pro Manual Del Usuario página 129

TEST 14:
Idle Speed Actuators (Astra) or similar.
Activate the motor for advance or return of the axle and check the course sensor conditions.
Conduction:
1) Connect the actuation cable in the actuator connector and connect it to the Actuador.
See item 3.4 - CABLE CONEXION.
1
2
3
4
2) Select test 14 and press the Start/cont.
The icon will come on, indicating active function. For this test no information will be displayed.
3) Use the keys , to active the actuator, thus checking it's functioning, advance and retract the shaft.
course sensor
to star the test.
With the test 14 active, press the limit switch, according to the drawing on the left.
The display will display the message "
switch it´s working.
To end the procedure, press the Stop/Pause
33
MULTIJET PRO
"showing that the course
or the "Function" key. .