alfatest Multijet Pro Manual Del Usuario página 140

MULTIJET PRO
- Use and/or execution of software, applications and medias that violate the copyrights of its owners, are the sole
and exclusive liability of the equipment owner, who will be aware and will answer for the penalties foreseen in
law. Damages caused to the equipment due to these situations will result in loss of warranty.
- Damages caused by use of chemical solutions or products for cleaning and/or preservation of the equipment
that are not indicated in this manual will not be covered by the warranty.
The tecnhical assistance will not be responsable for damage caused by transport of products shipped
by the customer.
- (1)Remove all test fluid from the internal reservoir.
- Pack appropriately. Use the original packaging if possible .
Using no original packaging:
Submit the main module without the glass test tubes.
- (2)Demount all test tubes . Keep the upper mounting rings together them. See item 11.0.
- (3)Demount the test tubes support.
- Replace the holding screws of the test tubes support . Avoid to lose.
- (4)Replace the test tubes rubber bases. You will prevent to lose these and also the plungers.
- Involve the main module and the test tubes support with plastic bubble or similar.
- Fill with soft material the empty spaces of packaging. eg:. Mashed sheets of newspaper or other material
for this purpose. The internal volumes should be supported very well and motionless.
- Indicate in the external parts : - Keep dry.
or copy the last page and past on the box sides.
Alfatest S/A reserves the right to change the general, technical and esthetic features of its products without
SHIPPING FOR SERVICE
- Fragile. - Top side of the box.
Soft material
prior notice.
44