alfatest Multijet Pro Manual Del Usuario página 136

MULTIJET PRO
Mounting
1 - Replace the plungers always with the ball point down.
2 - Assemble the filters on rubber bases.
3 - Lubricate the sealing flange of the rubber base, use Ultra test.
4 - Insert in plunger compartment with twisting movement until it is firmly seated.
5 - Gently insert the test tube on the rubber base and push to make the top aligned with the holes of the structure.
Repeat the rotary motion of the test tube for better accommodation.
6 - Insert totally the upper mounting rings.
3
1 2
Lubrificate
4 5
6
IMPROPER ASSEMBLY WILL RESULT IN LEAKS.
40