alfatest Multijet Pro Manual Del Usuario página 131

On pressing the keys
touch with the message "
On pressing the keys
touch with the message "
To end the procedure, press Stop/Pause
WARNING: This test only will be possible if there is no active injectors test (1 to 10).
If this function is selected during the execution of a test, displays the message
indicating that it is not possible now.
TEST 16:
Perform actuation of motorcycles stepper motors.
Execução:
1) Connect the motorcycle stepper motor cable in the actuator output . See item 3.4 - CABLES CONEXION.
2) Select the test 16 through the keys
The icon will come on, indicating active function. For this test no information will be displayed.
Use the keys to active the stepper motor, thus checking its functioning.
To end the procedure, press the Stop/Pause
, the duty cycle will be set. The parameter display will only occur in the 1st
" and in the subsequent touches only the set value will be displayed.
, the frequency will be set. The parameter display will only occur in the 1st
" and in the subsequent touches only the set value will be displayed.
or "Function" key. .
. Press the Start/cont.
or the "Function" key. .
35
MULTIJET PRO
to start.