Idle Speed Actuator Test - alfatest Multijet Pro Manual Del Usuario

MULTIJET PRO

6.0 - IDLE SPEED ACTUATOR TEST

The tests perform actuation of the idle speed actuators most used in the market.
TEST 12:
Stepper Motors Magneti Marelli or similar.
1
3
4
TEST 13:
Stepper Motors Delphi or similar.
1
4
2
Conduction:
1) Connect the stepper motor actuation cable in the actuator connector and connect it in the stepper motor. See item
3.4 - CABLES CONEXION.
2) Select the desired test and press the Start/Cont.
function. For this test no information will be displayed.
3) Use the keys to active the stepper motor, checking it is functioning.
To end the procedure, press Stop/Pause
IMPORTANT: CLEANING STEPPER MOTORS IN THE ULTRASONIC VAT IS NOT RECOMMENDED. THIS
PARTS HAS NO SEAL, COULD BE DAMAGED PERMANENTLY.
1
2
2
3
4
1
2
3
3
4
to start . The icon
or the "Function" key. .
CLEAN ONLY MECHANICAL PART.
32
will come on, indicating active