alfatest Multijet Pro Manual Del Usuario página 130

MULTIJET PRO
TEST 15:
Air control valve test (IAC).
Analysis and checking of the functioning of this type of actuator can depend on the vacuum generated by the
engine. The Multijet PRO provides the actuation (electric sign) controlled by the user. Through this feature, one
can check the actuation of the solenoid and in some cases controlled movement of the axle.
Conduction:
1) Connect the actuator to the injector cable number 1, if necessary use appropriate adapter.
For this application, the injector test output will be used as shown below.
ACTUATOR
2) Select test 15 with the keys
3) To start the test, press the Start/Cont.
As of this moment, through the
duty cycle respectively.
e.g.: Idle Control Valve (Hitachi) - Escort 16V ; Fiesta 1.0 e 1.3; Ford KA 1.0 e 1.3.
Adjust FREQ (
CONECTOR 1
INJECTORS CABLE
.
.
and keys, one will be able to set the frequency and the
DUTY CICLE
DUTY CYCLE
FREQUENCIA
FREQUENCY
) +/-75Hz e duty ( )+/- 5.0ms.
34