Getting Started - Zavor LUX LCD Manual Del Usuario

Getting Started:

Read the safety instructions found in this manual before plugging in and operating
the unit. Before using the multi-cooker for the first time, follow these steps:
1. Remove all packing materials and literature from inside the Zavor LUX™ LCD
Multi-Cooker. Lift out the removable cooking pot and remove any pieces of
paper from under it. Remove the plastic protection from the control panel and
any stickers from the stainless steel body.
2. Wash all removable parts in warm soapy water, rinse, and dry all parts
thoroughly. Wipe the stainless steel outer housing with a clean damp cloth.
NEVER submerge the stainless steel outer housing in water or any other liquid.
Only the removable cooking pot is dishwasher safe.
3. To clean the pressure regulator knob, gently push the pressure regulator knob
down and turn it counterclockwise past STEAM to the CLEAN setting. Once
the dot on CLEAN is aligned with the dot on the base of the pressure regulator,
you can lift the pressure regulator up and out of the housing. Look through
the holes of the pressure regulator to make sure nothing is obstructing the
pressure stream, then clean the pressure regulator knob with warm soapy
water, allowing the water to run through the pressure regulator to remove all
particles.
4. To put the pressure regulator back into the lid, align the CLEAN setting with the
dot on the base, gently push down on the pressure regulator and turn the knob
clockwise until it slides back into place.
5. Make sure the silicone gasket is placed correctly inside the lid or else the
cooker cannot function properly.
6. After thoroughly drying all parts, place the removable cooking pot back into the
multi-cooker before cooking.
Before First Use
9